Next Page →
← Previous Page
6: IDEAL RAMJET CYCLE

Station 3: end of compressor

p03 = pcp02 : specified.

Temperature reached if the compressor were isentropic is T03s.This can be found using the isentropic relation

Ideal compressor work per unit time per unit mass flow rate is:

Actual compressor work can be found using the compressor efficiency:

From this, the actual temperature can be found:

Station 8: end of fan compression:

The value of ideal fan work can be found just as the ideal compressor work was found, and the actual fan work is:

and

Station 4: end of burner

is specified.

Heat released per unit mass of fuel burned is

Fuel/air ratio is

Next Page →
← Previous Page